CO₂ Laser Tube
Series-A Laser Tube
Mainly used for cutting, marking, engraving, etc.
| Model | Length (mm) |
Diameter (mm) |
Rated Power (W) |
Maximum Power (W) |
Catalyst | Working Current （mA） |
Tolerance (%) |
Warranty (month) |
Power Supply |
|---|---|---|---|---|---|---|---|---|---|
| A2 |
1270±20
 |
80/60 | 90 | 100 | Yes | ≤30 | ≤±5 | 12 | 80W |
| A3 |
1330±20
 |
110 | |||||||
| A4 |
1450±20
 |
100 | 130 | 120W/130W | |||||
| A5 |
1600±20
 |
120 | 140 | ||||||
| A6 |
1650±30
 |
130 | 160 | 150W | |||||
| A7 |
1780±30
 |
140 | 170 | ||||||
| A8 |
1850±30
 |
150 | 180 | ||||||
| A18 |
1880±30
 |
100/80/60 | 160 | 180 | 200W | ||||
| A20 |
2080±30
 |
180 | 210 |
More:
Applications:
Our tubes can be used for cutting, marking and engraving all kinds of materials.
1. Non-metallic materials: Below 30mm thickness of acrylic, leather,cloth, paper,wood and other non-metallic materials.
2. Metallic sheet: Below 2mm stainless steel or carbon steel slice(over 150w laser tubes with oxygen, recommend A18 or A20 formetallic process).
Remarks:
1. Suggest working current at 28-30mA.
2. Length tolerance within 30mm.
3. We reserve the rights to modify the data without notice previously, please check with seller before ordering.